Daikin Air Conditioner Inverter FTKC71QVMV (3.0Hp)

Smile Curve Series

The FTKC series features Daikin's smile curve design for the front panel creates a stylish, modern appearance which blends easily with any interior décor.

• Improved performance over non-inverter models
• Titanium apatite photocatalytic air-purifying filter
• Quiet nights in your neighborhood

Smile Curve

The FTKC series features Daikin's smile curve design for the front panel.
The smile curve creates a stylish, modern appearance which blends easily with any interior decor.

Next-Generation Refrigerant R-32

To cope with climate change, Daikin has now adopted 
R-32, next-generation refrigerant which does not deplete the ozone layer and lower global warming.

* Source: Values for 100 year global warming potential (GWP) from IPCC Fourth Assessment Report. Comparative 100 year GWP: HFC410A, 2,090; HFC32, 675.

Inverter Technology

Energy Saving

After the indoor temperature approaches the set temperature, inverter control adjusts to low capacity operation to maintain this temperature, making inverter models more energy saving than non-inverter models.

Powerful

Inverter air conditioners operate at maximum capacity as soon as they start up. This burst of increased power allows them to reach the set temperature more quickly.

Comfortable

Inverter air conditioners adjust capacity according to changes in the air conditioning load and the difference between the indoor temperature and set temperature is small, giving higher comfort levels than with non-inverter air conditioners.

Titanium Apatite Photocatalytic Air-Purifying Filter

While the filter’s micron-level fibres trap dust, titanium apatite effectively adsorbs odours and allergens, as well as deodorises odours. This filter delivers consistent performance for approximately three years if it is washed with water once every six months.

Intelligent Eye

Detect human movement in a room by using infrared sensor to prevent energy wastage.

Smart Control by Smartphone
The Daikin mobile controller application lets you manage Daikin inverter air conditioners from anywhere, helping to maintain a comfortable home environment while saving energy.
This convenient app gives you full control of core functions such as start/stop, operation mode and set temperature as well as advanced features like ưeekly scheduling. The app also lets you monitor your system to ensure it is performing as desired.
Setup is extremely easy. After downloading the software, you only need to connect to a private wireless network inside your home or mobile network outside.
Out of Home Operation
The Daikin mobile controller application takes care of those nagging worries about whether you turned of the air conditioner and ensures a comfortable air conditioned environment is waiting when you return home. Even outside your home, you can easily monitor and adjust points such as the operating status and room temperature or start and stop all units.

In Home Operation
At home, the Daikin mobile controller application turns your smartphone into a centralised remote controller? It only takes a few easy taps to check and adjust the temperature in a child's room on the second floor from the living room. You can also start and stop the air conditioner in the living room from your bedroom.

Anticorrosion Treatment of Outdoor Heat Exchanger Fins

The surface of heat exchanger fins is covered with a thin acrylic resin layer to enhance the fins' resistance to acid rain and salt corrosion. A hydrophilic film layer also prevents rust caused by the run off of water droplets.

Indoor Unit Quiet Operation

The whole series give you a choice of 5-step, Quiet or Automatic settings for the fan speed. The Quiet setting selects Indoors Unit Quiet Operation, which decreases the sound pressure level 3 to 6 dB (A) below the Low setting and help you to sleep comfortably at night..

Outdoor Unit Quiet Operation

This function decreases the sound pressure level by 3 to 7 24 Hour On/Off Timer
dB (A) below the rated operation. It provides a sound pressure
level of 43 dB (A)1 for the RKV25, RXV25, RKC50/60 and
RHM50/60. Capacity may decrease when Outdoor Unit Quiet
Operation is selected.

This function is not available for the RXM20/25/35.

Titanium Apatite Photocatalytic Air-Purifying Filter

Photocatalytic air purifying is a deodorising and antibacterial technology. Daikin was the first to apply this advance to the air-purifying filters used in air conditioners1. Daikin’s success has led manufacturers in various industries to adopt the technology for antibacterial products. Titanium apatite is an advanced photocatalytic material with great adsorption power. While a filter’s micron-level fibres trap dust, titanium apatite effectively adsorbs and decomposes bacteria. The photocatalyst is activated simply by exposure to light. This filter delivers consistent performance for approximately three years if it is washed with water once every six months.

This filter is not a medical device. Benefits such asthe adsorption and decomposition of bacteria are only effective for substances which are directly attached to the Titanium Apatite Photocatalytic Air-Purifying Filter.

Specifications

Note: The above values are based on operation with a 220 V, 50 Hz power supply.
Measurement conditions

1. Cooling capacity is based on: indoor temp. 27°CDB, 19°CWB; outdoor temp. 35°CDB; piping length 7.5 m.
2. Sound pressure levels are based on the temperature conditions 1 above. These are anechoic conversion values. These values are normally somewhat higher during actual operation as a result of ambient conditions.