Capacity Air Conditioner 2.5 HP | Type | Refrigerant Gas R32 |
Specifications | ||
Made in | : | Brand of Japanese, Made in Thailand |
Refrigerant | : | R410A |
Type | : | Inverter AC - Cooling Only |
Cooling Capacity | : | 2.5 Hp - 20.500 Btu/h |
Use For Room | : | Room area 31 - 34 m² or volume 93 - 102 m³ ( Suitable for living room, office ) |
Power Input (Ph/V/Hz) | : | 1 phase, 220 - 240V, 50Hz |
Power consumption (kW) | : | 1.58 Kw |
Refrigerant/ Liquid Pipe Diameter (mm) | : | 9.5 / 15.9 |
Maximum Pipe Length | : | 50 (m) |
Maximum Elevation Length | : | 30 (m) |
Cooling Seasonal Performance Factor (CSPF) | : | 5.99 |
Weigh | : | ) |
Indoor Unit | ||
Indoor Unit Model | : | FHQ60DAVMA |
Indoor Unit Dimensions (mm) | : | 235 x 960 x 690 (mm) |
Indoor Unit Net Weight (Kg) | : | 25 (kg) |
Outdoor Unit | ||
Outdoor Unit Model | : | RZR60MVMV |
Outdoor Unit Dimensions (mm) | : | 595 x 845 x 300 (mm) |
Outdoor Unit Net Weight (Kg) | : | 43 (kg) |
Anti-Corrosion Treatment for Outdoor Unit Heat Exchanger
To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated PE fins (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit.
The latest stylish model
Comfortable
Note: Factory settings is “standard”.
“High ceiling” are set with remote controller by field setting.
Installation flexibility for freedom of design
Easy maintenance
Drain pump kit (option) includes a silver ion antibacterial agent that assists in preventing the growth of slime, bacteria, and mould that cause smells and clogging
Non-flocking flap
Condensation does not easily form on and dirt does not cling to non-flocking flap. It is easy to clean.
Easy-clean, flat surfaces
It is easy to wipe dirt off the flat side and lower surfaces of the unit.
Quiet operation dB(A)
Oil resistant grille
CEILING SUSPENDED TYPE
Note :
1. Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).
2. Capacities are net, including a deduction for cooling for indoor fan motor heat.
3. The operation sound is measured in anechoic chamber. If it is measured under the actual installation conditions, it is normally over the set value due to environmental noise and sound reflection.