Daikin VRV System Slim Ceiling Mounted Duct Indoor Unit Inverter (1.0Hp) FXDSQ25AVM

PricePrice: contact

(VAT included)

Có 3 công suất làm lạnh. Bạn đang chọn 2.5 HP

Specifications
Made in	:	Japanese Brand
Refrigerant	:	R-410A
Type	:	Inverter
Cooling Capacity	:	1.0 Hp - 9.600 Btu/h - 2.8 kW
Heating Capacity	:	10.900 Btu/h - 3.2 kW
Power Input (Ph/V/Hz)	:	1 Phase 220 - 240 V 50Hz
Power consumption (kW)	:	Cooling: 0.029 kW Heating: 0.025 kW
Refrigerant/ Liquid Pipe Diameter (mm)	:	6.4 / 12.7
Dimensions (H x W x D)	:	200 × 700 × 450 mm
Weigh	:	17 kg

Area and air volume calculated by room in ideal conditions, closed room, concrete wall, good insulation, no direct ventilation wc, washbasin...

Thông số kỹ thuật
Xuất xứ	Thương hiệu : Nhật
Loại Gas lạnh	R-410A
Loại máy	Inverter (tiết kiệm điện)
Công suất làm lạnh	1.0 HP (1 Ngựa) - 9.000 Btu/h
Công suất sưởi ấm	10.900 Btu/h
Sử dụng cho phòng	Diện tích làm lạnh hiệu quả : Diện tích 12 - 15 m² hoặc 36 - 45 m³ khí (thích hợp cho phòng khách văn phòng)
Nguồn điện (Ph/V/Hz)	1 Pha 220 - 240 V 50Hz
Công suất tiêu thụ điện	Lạnh: 0.029 kW Sưởi: 0.025 kW
Kích thước ống đồng Gas (mm)	6.4 / 12.7
Kích thước (C x R x S)	200 × 700 × 450 mm
Khối lượng	17 kg
Mặt Nạ
Kích thước mặt nạ (mm)	180 × 722 × 70 mm
Trọng lượng mặt nạ (Kg)	1.0 kg

Description

Specifications

Note: Specifications are based on the following conditions:

Cooling: Room temp 27 ° CDB, 19.0 ° CWB, Outdoor temp 35 ° CDB, Solvent equivalent length: 7.5m, Level difference: 0m.
Heating: Room temp 20 ° CDB, Outdoor temp 7 ° CDB, 6 ° CWB, Piping medium equivalent length: 7.5m, Level difference: 0m.
The capacity of the indoor unit is for reference only. The actual capacity of the indoor unit is based on the total capacity rating. (See Technical documentation for details.)
Noise level: Convertible in non-anechoic conditions. The measurement position below is 1.5m from the center of the machine.

During actual operation, these values are usually slightly higher due to ambient conditions.

Values are based on conditions when the static pressure is outside 10 Pa.
External static pressure can be changed by setting on the remote, it means ‘High static pressure- Standard’ (Factory setting is 10 Pa).
The noise values given above are for the rear escapement. In the case of the bottom retracement, it can be calculated by adding 5dB(A).