| Capacity Air Conditioner 2.0 HP | Type | Refrigerant Gas R410A |
| Specifications | ||
| Made in | : | Japanese Brand |
| Refrigerant | : | R-410A |
| Type | : | Inverter |
| Cooling Capacity | : | 2.0 Hp - 19.100 Btu/h - 5.6 kW |
| Power Input (Ph/V/Hz) | : | 1 Phase 220 - 240 V 50 Hz |
| Power consumption (kW) | : | Cooling: 0.04 kW Heating: 0.04 kW |
| Refrigerant/ Liquid Pipe Diameter (mm) | : | 6.35 / 12.7 |
| Dimensions (H x W x D) | : | 208 x 570 x 570 mm |
| Weigh | : | 15 kg |
| Panel | ||
| Panel Dimensions (mm) | : | 10 x 625 x 625 mm |
| Panel Net Weight (Kg) | : | 3 kg |
The indoor unit structure is made with a square shape suitable for ceiling dimensions in the building of 600 mm x 600 mm.
Also, the interior design of the unit is synchronized with the lighting system, providing an elegant, luxurious, and luxurious space.
In comparison, the mask weighs 3 kg, and the body weighs 14 kg (models P15, P20 and P25) or 15 kg (models P32, P40 and P50). The weight of these indoor units is 5 kg lighter than the PLFY-VEM-E model, which is easier to install.
A total of 8 sensors spin at 360 ° every 3 minutes. In addition to measuring body temperature, the device can calculate precisely the number of people in the room and their locations using algorithms.
Energy-saving mode based on the number of people: 3D I sensor senses the number of people in the room. Calculate the number of people in the room to adapt the operation to the actual time. As the number of people reduces by 30%, the room temperature increases by 1 ° C (as cooled) or low by 1 ° C (when heated) to save electricity. The temperature is regulated based on the number of people present in the room.
Energy-saving mode when there are no people: when the 3D I sensor senses that there are no people in the room, the device changes to energy-saving mode. Whether the space is unoccupied for around 60 minutes, the space temperature rises by 2 ° C (when cooled) or falls by 2 ° C (when heated) to conserve energy. It helps the reduction of energy losses during cooling and heating.
Auto-off mode while no users are present: while the space is unoccupied for a predetermined period, the air conditioner shuts off automatically, saving more energy. The time before deactivation can set from 80 to 180 minutes, with a time of 10 minutes. (* Auto-switch mode when no user is present when multiple indoor units are running with the MA controller.)
Setting Direct / Indirect Air Path *
Some people don't want the wind blowing directly on them, and others prefer to cool from head to toe. The amount of likes and dislikes varies. With the 3D I sensor, you can pick the correct direct/indirect wind direction for each person by adjusting the blades of the island in the indoor unit. (PAR-32MAA or PAR-SL100A-E is needed to be installed)
Seasonal cold winds *
When cooling: conserve energy when keeping temperatures comfortable by alternating between ventilation and cooling automatically. When the fixed temperature is achieving, the air conditioner changes to swing mode to ensure that the room temperature is a control efficiently. This intelligent feature helps to keep the user calm and relaxed. (PAR-32MAA is a requirement to install.)
Heating: The air conditioner automatically changes between air circulation and heating. The heat radiated near the roof is reused by the circulation of the wind. When the set temperature is achieving, the air conditioner changes from heating to air circulation and blasts the air horizontally. It helps to drives the intense stream of hot air near the ceiling down to the customer, delivering smart heating. (PAR-32MAA is a requirement to install)
Feedback
