| Capacity Air Conditioner 1.0 HP | Type | Refrigerant Gas R410A |
| Specifications | ||
| Made in | : | Japanese Brand |
| Refrigerant | : | R-410A |
| Type | : | Inverter |
| Cooling Capacity | : | 1.0 Hp - 9.600 Btu/h - 2.8 kW |
| Power Input (Ph/V/Hz) | : | 1 Phase 220 - 240 V 50Hz |
| Power consumption (kW) | : | Cooling: 0.06 kW Heating: 0.06 kW |
| Refrigerant/ Liquid Pipe Diameter (mm) | : | 6.35 / 12.7 |
| Dimensions (H x W x D) | : | Behind: 292 x 640 x 580 mm Below: 300 x 640 x 570 mm |
| Weigh | : | 18 kg |
Low noise design from 20dB * to 35dB owing to reduced airflow.
* The noise value measured with the indoor unit with the return duct from the back in the soundproof room (The noise value will be higher for the indoor unit near return duct from below the indoor unit).
* Prices are a measure at the low flow rate, SP static pressure, and 220V power source.
The model has refrigerant/condenser lines, and the control box can install on the left or right side of the indoor unit. It can extend flexibly to symmetrical hotel rooms.
The safety cage of the fan has no screws attached and can be easily removed, making it easier to maintain the fan. The air filter will detach from the side panel or the back of the unit.
The return airflow at the rear or the bottom of the unit can select depending on the room layout.
Feedback
