| Capacity Air Conditioner 2.0 HP | Type | Refrigerant Gas R410A |
| Specifications | ||
| Made in | : | Brand of Japanese, Made in Thailand |
| Refrigerant | : | R410A |
| Type | : | Inverter AC - Heat Pump |
| Cooling Capacity | : | 2.0 Hp - 17.100 Btu/h |
| Use For Room | : | Room Area 24 - 27 m² or Volume 72 - 81 m³ ( Suitable for living room, office ) |
| Power Input (Ph/V/Hz) | : | 1 phase, 220 - 240V, 50Hz |
| Power consumption (kW) | : | 1,52 Kw |
| Refrigerant/ Liquid Pipe Diameter (mm) | : | 6.35 / 12.7 |
| Indoor Unit | ||
| Indoor Unit Model | : | FDE50VG |
| Indoor Unit Dimensions (mm) | : | 210 x 1.070 x 690 (mm) |
| Indoor Unit Net Weight (Kg) | : | 28 (kg) |
| Outdoor Unit | ||
| Outdoor Unit Model | : | SRC50ZMX-S |
| Outdoor Unit Dimensions (mm) | : | 640 x 800 x 290 (mm) |
| Outdoor Unit Net Weight (Kg) | : | 45 (kg) |
High efficiency
Energy efficiency was improved by use of DC fan motor & high efficient heat exchanger.
Reduction of weight
Thanks to decreasing the numbers of fan motor from two to one, reduction of weight was achieved.
Reduction of sound pressure level (Lo mode)
Flap control
The flap can swing within the range of upper and lower flap position selected with wired remote control.
Improved installation workability
Increased freedom of a piping layout
The refrigerant pipe from the unit can be arranged in three directions, rear, right and up.
The drain pipe can be arranged in two directions, left and right. This will allow a free layout of piping for various installation conditions. The unit can only be serviced from the bottom.
Feedback
