Mitsubishi Heavy VRV Inverter Ceiling Mounted Duct Connected indoor unit (8.0Hp) FDU224KXZE1

PricePrice: contact

(VAT included)

Brand: Mitsubishi Heavy

Có 2 công suất làm lạnh. Bạn đang chọn 10 HP

8.0 HP

10 HP

Specifications
Made in	:	Japanese Brand
Refrigerant	:	R-410A
Type	:	Inverter
Cooling Capacity	:	8.0 Hp - 22.4 kW
Power Input (Ph/V/Hz)	:	1 Phase 220 - 240 V 50Hz
Refrigerant/ Liquid Pipe Diameter (mm)	:	ø9.52 / ø19.05
Dimensions (H x W x D)	:	379 x 1600 x 893 mm
Weigh	:	89 kg

Area and air volume calculated by room in ideal conditions, closed room, concrete wall, good insulation, no direct ventilation wc, washbasin...

Thông số kỹ thuật

Thông số kỹ thuật
Xuất xứ	Thương hiệu : Nhật
Loại Gas lạnh	R-410A
Loại máy	Inverter (tiết kiệm điện)
Công suất làm lạnh	8.0 Hp (8.0 Ngựa) - 80.000 Btu/h
Sử dụng cho phòng	Diện tích làm lạnh hiệu quả : Diện tích 101 - 107 m² hoặc 303 - 321 m³ khí (thích hợp cho phòng khách văn phòng)
Nguồn điện (Ph/V/Hz)	1 Pha 220 - 240 V 50Hz
Kích thước ống đồng Gas (mm)	ø9.52 / ø19.05
Kích thước (C x R x S)	379 x 1600 x 893 mm
Khối lượng	89 kg

Description

External Static Pressure(E.S.P) control

You can set External Static Pressure (E.S.P.) by method of manual setting on remote control. Indoor unit will control fan-speed to keep rated air flow volume at each fan speed setting. You can set required E.S.P. by wired remote control that calculated with the set air flow rate and pressure loss of the duct connected.

Quiet operation:45dB(A)

Thanks to use of DC fan motor, fan steps increase from two to four and quiet operation is achieved. (Sound pressure level 45dB(A) in the Lo mode).

Improvement of the serviceability

Fan unit (impeller and motor) can be pulled out from the right side of the unit. Maintenance can be available from the right side or the bottom side. (Common for FDUM22~160KXE6F & FDU45~160KXE6F)

Remote control (option)

Specifications

1. The data are measured under the following conditions(ISO-T1). Cooling: Indoor temp. of 27ºCDB, 19ºCWB, and outdoor temp. of 35ºCDB. Heating: Indoor temp. of 20ºCDB, and outdoor temp. of 7ºCDB, 6ºCWB. External static pressure of indoor unit is 72Pa.

2. Sound pressure level indicates the value in an anechoic chamber. During operation these values are somewhat higher due to ambient conditions.

*Powerful-Hi can be selected. Sound pressure level: FDU224/280 52dB(A). Air flow: FDU224/280 80m3/min.