| Capacity Air Conditioner 3.0 HP | Type | Refrigerant Gas R410A |
| Specifications | ||
| Made in | : | Brand: Japan - Made in: Malaysia |
| Refrigerant | : | R410A |
| Type | : | Mono |
| Cooling Capacity | : | 3.0Hp - 28.000 Btu/h |
| Use For Room | : | Area 35 - 40 m² or 100 - 115 m³ (suitable for living room, office) |
| Power Input (Ph/V/Hz) | : | 1 Phase, 220 - 240 V, 50Hz |
| Power consumption (kW) | : | 2.84 kW |
| Refrigerant/ Liquid Pipe Diameter (mm) | : | 9.52 / 15.88 |
| Maximum Pipe Length | : | 45 m |
| Maximum Elevation Length | : | 25 m |
| Energy Efficiency Ratio (EER) | : | 2.89 |
| Indoor Unit | ||
| Indoor Unit Model | : | S28PU1H5 |
| Indoor Unit Dimensions (mm) | : | 256 x 840 x 840 mm |
| Indoor Unit Net Weight (Kg) | : | 20 kg |
| Panel | ||
| Panel Dimensions (mm) | : | 44 x 950 x 950 mm |
| Panel Net Weight (Kg) | : | 4 kg |
| Outdoor Unit | ||
| Outdoor Unit Model | : | U-28PV1H5 |
| Outdoor Unit Dimensions (mm) | : | 695 x 875 x 320 mm |
| Outdoor Unit Net Weight (Kg) | : | 57 kg |
Compact indoor unit design, 950mm square mask, wide louver, suitable for installation in the living room, restaurant, office... brings the most comfortable feeling, ideal for installation below 50m2.
Panasonic, all in-house manufactured compressors are supplied to the world.
The cumulative total of high-quality compressors reaches 580 million units*.
* As of September 2019 (In-house research)
Corrosion-resistance treated for high resistance to rust and salty air to assure long-lasting performance.
Protect condenser against corrosion from air, water, and other corrosive.
Has a higher cooling capacity hence better heat transfer.
Contact sections on the Printed Circuit Board (PCB) are resin-potted to prevent adverse effects when in contact with water droplets.
The outdoor unit is layered with multiple protection coatings to withstand salty air and rain exposure.
The latest nanoe™X device uses a "multi-leader discharge" system that discharges ten times more OH radicals through counter electrodes with four discharging bars for better performance.
nanoe™ X is a tiny ion the size the nanometers and generated at a rate of 4.8 trillion per second.
Thanks to innovation in the fan motor and turbofan with 3D vortex blades for comprehensive and powerful airflow to cool every corner of the room.
The wind blowing from the center spread further out and the wind blowing from the more enormous side wings spread throughout the room. Thus, the wind comes from all four directions of the air conditioner and blows gently in a circle from the indoor unit.
Adding an extra wing and a more comprehensive main wing design reduces turbulence and increases airflow. In addition, the wider-angle nozzle allows the airflow to blow up to 5 meters away.
The drain hose can raise 750mm above the bottom of the machine simply by using a connector. This advantage makes it easier and more flexible when choosing a location to install the block in the house.
.jpg)
For optimal comfort, it is recommended to clean the filter after 1.5 months of use.
Feedback
