Capacity Air Conditioner 4.0 HP | Type | Refrigerant Gas R32 |
Specifications | ||
Made in | : | Brand: Japan - Made in: Malaysia |
Refrigerant | : | R32 |
Type | : | Mono - 1-way type (cooling only) |
Cooling Capacity | : | 4.0 Hp - 36.000 Btu/h |
Use For Room | : | Area 55 - 60 m² or 165 - 180 m³ |
Power Input (Ph/V/Hz) | : | 3 Phases, 380 - 415 V, 50Hz |
Power consumption (kW) | : | 2.83 kW |
Refrigerant/ Liquid Pipe Diameter (mm) | : | 9.52 / 15.88 |
Maximum Pipe Length | : | 45 m |
Maximum Elevation Length | : | 30 m |
Energy Efficiency Ratio (EER) | : | 3.73 |
Indoor Unit | ||
Indoor Unit Model | : | S-36PU1H5B |
Indoor Unit Dimensions (mm) | : | 319 x 840 x 840 mm |
Indoor Unit Net Weight (Kg) | : | 24 kg |
Panel | ||
Panel Dimensions (mm) | : | 33.5 x 950 x 950 mm |
Panel Net Weight (Kg) | : | 5 kg |
Outdoor Unit | ||
Outdoor Unit Model | : | U-36PN1H8 |
Outdoor Unit Dimensions (mm) | : | 695 x 875 x 320 mm |
Outdoor Unit Net Weight (Kg) | : | 56 kg |
The indoor unit is a compact design, square panel size 950mm wide air outlet suitable for living room, restaurant, office installation ...
Thanks to advances in fan motor and the Turbo Fan with Twisted 3D Blades provide large and powerful airflow to cool every corner of the room.
Air from the center is sent farther and the air blown out of the larger side flaps spreads throughout the room. The air comes from all four sides of the unit and expands gently in a circle centered on the outdoor unit.
New control technology gives users a wide selection of more specific airflow angles. Choose from the 3-Pattern Auto Swing to avoid direct exposure to cool air (total 50-degree swing wide).
The drain pump can pump water up to a height of 850mm, making drain pipe layout easy.
To prevent dew condensation in humid conditions, the indoor unit of Panasonic packaged air conditioners has both inside and outside heat insulators.
Panasonic all in-house manufactured compressors are supplied to the world.
The cumulative total of high-quality compressors reaches 580 million units*.
* As of September 2019 (In-house research)
Corrosion-resistance treated for high resistance to rust and salty air to assure long-lasting performance.
Protect condenser against corrosion from air, water, and other corrosive.
Has higher cooling capacity hence better heat transfer.
Contact sections on Printed Circuit Board (PCB) are resin-potted to prevent adverse effects when in contact with water droplets.
The outdoor unit is layered with multiple protection coating to withstand salty air and rain exposure.
The lastest nanoe™X device uses a "multi-leader discharge" system that discharges 10 times more OH radicals through counter electrode with 4 discharging bars for better performance.
nanoe is a tiny ion with the size in the nanometers, and generated at a rate of 4.8 trillion per second.